Harmonicc is a chord-progression explorer, MIDI sequencer, and AUv3 MIDI Processor. Choose a key, scale, and musical style; Harmonicc’s Harmony Engine presents musically related chord candidates as emoji pads. Audition a chord, add it to a pattern, shape the voicing and timing, then play or export the result.
Harmonicc can work as a standalone app with an optional built-in sampler, or as an AUv3 MIDI effect inside a compatible host. Its main output is MIDI: connect it to your favorite synth, sampler, or hardware instrument to turn its progressions into sound.
The default project starts in C major at 120 BPM with one pattern. Record, chord preview, next-chord recommendations, and sequencer playback are enabled initially.
The large current-chord display shows the harmonic starting point. The recommendation area contains possible next chords based on that chord, the current key and scale, and the selected style.
Each pad combines an emoji with a chord name. The emoji is a visual identity for the harmonic choice; the chord name tells you what will be played. You do not need to know Roman-numeral harmony to use the engine—listen, choose, and follow the candidates that suit your progression.
Two controls affect how you explore:
Changing Style reloads recommendations from the new style and brings tonic choices back into view. Changing Key or Scale recalculates the notes of every sequencer step while preserving the progression structure.
The interface has three main areas:
The Sequencer Play button is an enable/bypass control for the pattern. It does not start the transport by itself. In the standalone app, start playback with the app’s transport control. In AUv3 mode, start the host transport.
Tap the Sequencer title/arrow to switch between two layouts:
When the transport is stopped, touching a sequencer pad auditions its chord. During playback, tapping a step jumps playback to that position.
Record determines whether selecting a recommended chord appends it to the current pattern. Turn Record off when you want to explore the Harmony Engine without changing the sequence.
Every newly recorded step starts with these values:
Use Clear to remove the entire sequence. Clear requires a second tap while the question mark is visible. Undo restores the latest add, remove, move, paste, delete-before, delete-after, or clear action. Undo history is cleared when you change patterns and is not retained after leaving the current editing session.
Expand the Sequencer to reveal the complete step editor. Scroll horizontally to move through steps. Each step offers:
You can tap a value to choose it from a list or adjust a knob using the interaction style selected in Settings.
Long-press a step’s ear/step button for Delete Before, Delete After, Copy, and Paste. Copy/Paste transfers the complete step setup, including its voicing and performance values.
A project can contain multiple patterns. Each pattern keeps its own sequence, key, scale, style, Strum and Lofi values, current chord, and sequencer state.
Pattern selection can also be automated from MIDI CC or the AUv3 parameter surface.
Style changes the Harmony Engine’s recommendation vocabulary. Harmonicc currently includes 32 choices spanning General, historical/classical, jazz, popular, contemporary, world, and experimental categories. Examples include Baroque, Classical, Romantic, Swing, Bebop, Modal, Jazz, Pop, Rock, Blues, Funk, R&B, Ambient, Electronic, Cinematic, Bossa, Latin Jazz, Flamenco, Impressionist, Minimalist, and Avant Garde.
Key lets you choose a note name and flat, natural, or sharp accidental. Scale opens a searchable list with a Favorites tab. Alongside the built-in scale types—including major, minor, church modes, harmonic minor, and melodic minor—the picker can show compatible custom scales shared through the Bud app group.
Because Key and Scale regenerate each cached chord voicing, review any per-note selections after changing either setting.
Open Settings → Presets to browse two tabs:
Factory examples include Pop I, Circle of Fifths, II-V-I, Canon Progression, 12-Bar Blues, Rhythm Changes, Jazz II-V-I, Minor II-V-I, Coltrane Changes, Four Chord Pop, Bossa Nova, Samba, Trance, House, and Trap.
Selecting a preset loads it for preview. The preset browser remains open so you can move through other choices; use its Done or Cancel control when finished.
Harmonicc follows a beat-based transport. A step’s duration and repeat count determine when the sequence advances; Gate determines when its notes turn off.
Strum spreads the chord’s notes over time from low to high. At higher settings, the spread can reach up to half of the gated step duration, producing a pronounced guitar-like or cascading entrance.
Lofi adds random timing displacement of up to a sixteenth-note (one quarter of a beat) at the maximum setting. Use small values for subtle humanization. When combined with Strum, later chord notes may move slightly earlier or later around their strummed positions.
Strum and Lofi are applied during sequencer playback and MIDI export. They are not applied when sequence steps are played directly from incoming MIDI.
Harmonicc produces two MIDI streams:
The standalone app exposes two virtual outputs with those names when Virtual MIDI Out is enabled. In AUv3, the host sees the same two named MIDI outputs. Channel settings shown in the app use the conventional 1–16 numbering; internally they correspond to MIDI channels 0–15.
The chord and bass channels both default to channel 1. Put them on different channels when you want to drive separate instruments. If both streams feed the same destination and channel, the lowest note may be duplicated.
Incoming note, CC, and supported program-change messages are accepted through the selected physical/virtual input or the AUv3 host input, then filtered by MIDI In Channel where applicable.
When the host transport is stopped—or when the Sequencer Play toggle is disabled—an external keyboard or sequencer can trigger Harmonicc’s sequence steps directly.
Starting note maps one incoming MIDI note to step 1. The default is C4, MIDI note 60. With White keys mode enabled, successive natural keys trigger successive steps and black keys do not advance the step index. With White keys mode disabled, every chromatic semitone advances to the next step.
For chromatic mode, the mapping is:
step number = incoming note − starting note + 1
Only messages on the configured MIDI In Channel and notes at or above the starting note are used. Notes beyond the number of available steps do nothing. A triggered step uses its stored Velocity, not the incoming note velocity, and releasing the trigger releases the held output notes.
Patterns CC# changes patterns. On the configured input channel, a positive CC value selects that numbered pattern: value 1 selects pattern 1, value 2 selects pattern 2, and so on. The default controller number is CC 10.
Harmonicc also recognizes BrainBud’s Program Change 69 integration. It loads BrainBud’s shared key and scale into the current pattern. By default this message may arrive on any channel; the channel restriction can be changed in shared settings data.
The standalone app provides the components needed to sketch and audition progressions without an AUv3 host:
The standalone virtual ports are named Harmonicc In, Harmonicc Out, and Harmonicc Bass Out.
Harmonicc AUv3 is a MIDI Processor, not an instrument. Insert it in a host that supports AUv3 MIDI effects, route one or both of its MIDI outputs to an instrument, and use the host transport for sequencer playback. The plugin itself does not generate audio.
The AUv3 exposes these host-automatable parameters:
Host project state stores the complete Harmonicc project, including patterns, sequences, settings, and the current pattern. The plugin also exposes the 34 factory progressions to hosts that support AU factory presets. Multiple plugin instances maintain independent project state.
Open Settings → Export MIDI and tap Export Pattern N to create a .mid file for the current pattern. After generation, use the iOS share sheet to save or send it to another app.
The exported file uses the project tempo and includes the pattern’s sounding chord notes, step positions, rests, stored velocities, and Strum/Lofi timing offsets. It is a convenient starting point for orchestration or further editing in a DAW.
Confirm Sampler Enabled is on and its Volume is raised. If you are using an external instrument, enable Virtual MIDI Out or the desired MIDI destination and verify its input channel. Also confirm the app transport is running, the Sequencer Play toggle is enabled, and the current pattern contains at least one non-rest step with Gate above 0% and active notes.
Harmonicc AUv3 produces MIDI, not audio. Insert it as a MIDI effect, route Harmonicc Out to an instrument, arm or monitor the destination as required by your host, and start the host transport. Host MIDI-routing capabilities vary.
The Sequencer Play button only enables sequencing. Start the standalone transport or host transport separately. If incoming MIDI is triggering steps but transport playback is not, check that Sequencer Play has not been disabled.
Check MIDI In Channel, Starting note, and White keys mode. In White keys mode, black keys are filtered and do not represent additional steps. The incoming note must be at or above the starting note.
Verify that the message uses the configured Patterns CC# and MIDI In Channel. Send a positive CC value matching an existing pattern number—value 1 for pattern 1. Value 0 is ignored.
The bass stream is the lowest active voicing note and defaults to the same MIDI channel as the chord stream. Assign different MIDI Out and Bass Out channels and route the two named outputs to separate instruments.
In the standalone app, tap Settings → MIDI Panic. In a host, stop the transport, use the host’s panic/all-notes-off command if available, and restart playback.
This is expected. Strum and Lofi are sequencer timing effects. Direct MIDI Trigger Mode uses the step’s saved voicing and velocity without those offsets.
Per-note filtering is rebuilt after changing Bass, Octave, Inversion, Key, or Scale. Set the voicing first, then open Notes and make the final selection.
Restart the host after installing or updating Harmonicc, then rescan Audio Units if the host offers that option. For standalone routing, enable Virtual MIDI In or Out in Settings. If a physical or network destination is missing, reconnect it and reopen Settings so the device list refreshes.
That is intentional: it lets you preview several factory or user presets with previous/next browsing. Tap Done or Cancel when you are finished.